What is OJT evidence and why do I need it?

On-the-job training (OJT) evidence is documented proof that you have carried out practical electrical work in a real workplace under supervision. It is a mandatory component of electrical apprenticeships (Level 2 and Level 3) and is assessed as part of your end-point assessment (EPA). The purpose is to demonstrate that you can apply the theoretical knowledge learned at college or through your training provider in actual work situations. Without sufficient OJT evidence, you cannot progress to your EPA gateway, which means you cannot complete your apprenticeship. Your training provider will specify the exact OJT evidence requirements for your qualification, including the types of evidence required, the number of items, and the qualification criteria each piece of evidence must map to.

How many pieces of OJT evidence do I need?

The exact number depends on your training provider and the specific apprenticeship standard you are following. For the Level 3 Installation Electrician apprenticeship, most training providers require evidence covering all the knowledge, skills, and behaviours (KSBs) defined in the apprenticeship standard. In practice, this typically means 30 to 60 individual pieces of evidence across the full duration of the apprenticeship, covering areas such as installation work, inspection and testing, fault finding, health and safety, communication with clients, and working as part of a team. Quality is always more important than quantity — a smaller number of well-documented, detailed pieces of evidence that clearly demonstrate competence is far better than a large collection of poorly documented items. Aim for at least 2-3 strong pieces of evidence for each KSB area.

Can I use photos taken on my phone as OJT evidence?

Yes, photographs taken on your phone are one of the most common and effective forms of OJT evidence. However, a photo alone is not sufficient — you must accompany each photograph with a written description explaining what the photo shows, what work you carried out, what tools and materials you used, why you did it that way (referencing BS 7671 or other relevant standards where appropriate), and which qualification criteria or KSB the evidence demonstrates. Take photos at multiple stages of the work — before you start (the existing condition), during the work (showing your methods and techniques), and after completion (the finished installation). Ensure photos are clear, well-lit, and show enough context to understand what is being pictured. Avoid photos that could identify clients or their property without consent — focus on the electrical work itself.

Who can provide a witness testimony?

A witness testimony must be provided by someone who directly observed you carrying out the work and is competent to assess the quality of your work. In most cases, this is your workplace supervisor or the qualified electrician you work alongside. The witness must hold relevant qualifications (typically the full Level 3 Installation Electrician qualification or equivalent, plus current 18th Edition) and be employed by the same company or directly supervising your work on site. Your college tutor or training provider assessor can also provide witness testimonies for work observed during practical assessments at college. A witness testimony should describe what they observed you doing, the standard of your work, any areas where you demonstrated particular competence, and any areas for improvement. It should be signed and dated by the witness.

What is a reflective account and how do I write one?

A reflective account is a written description of a piece of work you carried out, combined with your reflection on what went well, what you learned, and how you would approach the same task differently in future. It is a first-person account written in your own words. A good reflective account covers: what the task was and why it was needed, what you did step by step, what tools, materials, and methods you used, any challenges you encountered and how you overcame them, what relevant regulations or standards applied (e.g., BS 7671 requirements), what you learned from the experience, and what you would do differently next time. Reflective accounts are particularly valuable because they demonstrate not just competence but also the ability to learn and improve — which is a key part of professional development. Aim for 200 to 500 words per reflective account, with enough technical detail to demonstrate understanding.

How do I organise my OJT portfolio?

Organisation is critical — a disorganised portfolio makes it difficult for your assessor to find evidence and can result in evidence being missed during assessment. The most effective approach is to organise your portfolio by the Knowledge, Skills, and Behaviours (KSBs) defined in the apprenticeship standard. Create a section for each KSB and place the relevant evidence within it. Each piece of evidence should be clearly labelled with the date, the type of work, the location (without identifying the client), the KSB it maps to, and a cross-reference to any related evidence. Many apprentices use a spreadsheet or tracking matrix to map their evidence against the KSBs, highlighting any gaps that need to be filled. Elec-Mate includes portfolio building tools that let you organise evidence digitally, link it to KSBs, and track your coverage across the full apprenticeship standard — all on your phone.

What happens if I do not have enough OJT evidence for EPA gateway?

If you do not have sufficient OJT evidence, you cannot pass through the EPA gateway and cannot proceed to your end-point assessment. Your training provider and employer will review your evidence portfolio before the gateway decision. If gaps are identified, you will be given additional time to gather the required evidence. This may mean your apprenticeship completion is delayed. To avoid this, start gathering evidence from day one of your apprenticeship, take photographs and write descriptions regularly (weekly is ideal), and review your evidence coverage against the KSB framework at least quarterly. Your training provider should also conduct regular progress reviews (typically every 12 weeks) where your evidence portfolio is reviewed and any gaps are identified. If your employer is not providing you with opportunities to gather evidence in certain areas, raise this with your training provider — they can work with your employer to ensure you get the necessary work experience.

APPRENTICE GUIDE

OJT Evidence Guide: Building Your Apprentice Portfolio

On-the-job training evidence is a mandatory requirement for every electrical apprenticeship. This guide covers exactly what evidence you need, how to document it properly, and how to build a portfolio that gets you through the EPA gateway — with practical tips from day one to end-point assessment.

Revise for your exams on your phone

Free for 7 days · No charge until day 8 · Cancel anytime · Used by 2,600+ UK electricians

10 min readUpdated 2026-10-28Andrew Moore, Founder of Elec-Mate

Written and reviewed by Andrew Moore, founder of Elec-Mate, against BS 7671:2018+A4:2026, IET Guidance Note 3 and the IET On-Site Guide.

ShareX in W

2,600+

UK electricians

“Replaced three separate apps with Elec-Mate. Certs, quotes, and scheduling all in one place.”
Daniel Palmer, DP Electrical · 5 out of 5

Key takeaways

01On-the-job training (OJT) evidence is a mandatory requirement for electrical apprenticeships — it demonstrates that you have applied your theoretical knowledge in real-world work situations under proper supervision.
02The five main types of OJT evidence are: photographic evidence of work carried out, witness testimonies from your supervisor, work logs and reflective accounts, skills sign-off records, and professional discussion records.
03Quality matters more than quantity — one detailed photograph with a clear description of what you did, why you did it, and how it relates to your qualification criteria is worth more than ten poorly documented photos.
04Your employer and supervisor play a critical role — they must provide witness testimonies, sign off your skills, and confirm that you have carried out work to a competent standard under their supervision.
05Elec-Mate includes OJT evidence tracking tools that let apprentices photograph work, record descriptions, link evidence to qualification criteria, and build their portfolio directly on their phone.

01 · Apprentice Guide

What Is OJT Evidence?

On-the-job training (OJT) evidence is the documented proof that you — as an electrical apprentice — have carried out real electrical work in a real workplace under the supervision of a qualified electrician. It is a mandatory component of every electrical apprenticeship in England, and without it, you cannot progress to your end-point assessment (EPA).

The purpose of OJT evidence is straightforward: your college or training provider teaches you the theory and gives you practical experience in a workshop environment — see our electrical apprenticeship guide for an overview of the full qualification pathway. OJT evidence proves that you can apply that knowledge and those skills in the real world — on actual installations, with real clients, under genuine working conditions.

The apprenticeship standard for the Level 3 Installation Electrician (ST0152) defines a set of Knowledge, Skills, and Behaviours (KSBs) that you must demonstrate competence in. Your OJT evidence supports your Level 3 qualification and helps your employer and training provider decide when you are ready for gateway, the point at which they confirm you can go forward to your end-point assessment. Under plan v1.2 the end-point assessment itself has no professional discussion or portfolio review: it is the AM2S practical, an online knowledge test and your behaviours, confirmed by your employer.

Free download · PDF

Get the BS 7671 A4:2026 Cheat Sheet — free

Every key change in the 2026 amendment on one page. AFDDs, TN-C-S protection, new schedule columns, model forms. Pinned on your van dash.

Every regulation change summarised
New model forms (EIC + MEIWC)
Free PDF — no subscription

02 · Apprentice Guide

Types of OJT Evidence

There are several types of evidence that you can use to build your OJT portfolio. A strong portfolio uses a mix of evidence types to demonstrate competence from multiple angles.

Photographic Evidence

Photos of work you have carried out — before, during, and after. Each photo must be accompanied by a written description explaining what you did and why. The most common and most effective form of evidence.

Witness Testimonies

Written statements from your supervisor or qualified electrician confirming that they observed you carrying out work to a competent standard. Signed and dated by the witness.

Work Logs and Reflective Accounts

Written descriptions of work you carried out, including your reflection on what went well, what you learned, and what you would do differently. Demonstrates professional development and self-awareness.

Skills Sign-Off Records

Formal sign-off by your supervisor confirming that you can perform specific tasks competently and safely. Usually structured around the KSB framework with a competent/not yet competent assessment for each skill.

Certificates and Test Results

Copies of certificates you contributed to (EICR, EIC, Minor Works), test results you recorded, and any documentation you helped produce. Shows your involvement in the full certification workflow.

03 · Apprentice Guide

Photographic Evidence: How to Do It Properly

Photographic evidence is the backbone of most OJT portfolios. Done well, a single photograph with a clear description can demonstrate multiple KSBs. Done poorly, a hundred blurry, undescribed photos are worthless.

Take before, during, and after photos — the "before" shows the existing condition or the starting point. The "during" shows your work in progress — this is the most valuable because it proves you actually did the work. The "after" shows the completed installation.
Include context — a close-up of a termination is useful, but also take a wider shot showing where it is in the installation. Context helps your assessor understand the scope and complexity of the work.
Write a detailed description — for each photo, write 100 to 200 words explaining: what the photo shows, what work you carried out, what tools and materials you used, why you chose that method, any regulations or standards that applied (cite BS 7671 regulation numbers where relevant), and which KSB the evidence demonstrates.
Respect client privacy — do not include photos that identify the client's property address, personal belongings, or family members. Focus on the electrical work itself. If your employer has a policy about photographs on client premises, follow it.

Take photos on every job, every day. It only takes 30 seconds to photograph your work, but trying to reconstruct evidence months later when you realise you have a gap in your portfolio is nearly impossible. For more on building a complete portfolio, see our apprentice portfolio guide.

04 · Apprentice Guide

Witness Testimonies

Witness testimonies are written statements from your supervisor or the qualified electrician you work alongside, confirming that they observed you carrying out work to a competent standard. They carry significant weight with assessors because they provide independent confirmation of your abilities.

A good witness testimony should include:

What was observed — a specific description of the work the apprentice carried out. "Installed a new consumer unit" is too vague. "Installed a Hager 12-way consumer unit with dual RCD configuration, terminated 10 circuits including a 32A cooker circuit and 16A immersion heater circuit, tested all circuits to BS 7671 requirements, and completed the EIC with my supervision" is much better.
Level of competence demonstrated — did the apprentice work independently with minimal guidance, or did they require significant direction? Both are acceptable depending on the stage of the apprenticeship, but the testimony should be honest about the level of support provided.
Health and safety awareness — did the apprentice follow safe working practices? Did they carry out a safe isolation procedure? Did they use appropriate PPE? Did they identify and manage any risks?
Signature, date, and witness details — the witness must sign the testimony, date it, and provide their name, qualifications, and relationship to the apprentice (e.g., "Supervising Electrician, ABC Electrical Ltd").

Ask your supervisor for witness testimonies regularly — at least monthly. Do not wait until the end of your apprenticeship and ask them to write 20 testimonies from memory. The best testimonies are written shortly after the work was observed, when the details are fresh.

05 · Apprentice Guide

Skills Sign-Off

Skills sign-off is a formal process where your supervisor confirms that you have demonstrated competence in specific practical skills. Your training provider will usually provide a skills sign-off document or matrix that lists all the practical skills you need to demonstrate during your apprenticeship.

Common skills areas for the Level 3 Installation Electrician include:

Safe isolation — proving and locking off supplies, using a voltage indicator proved before and after isolation.
Cable installation — clipping, trunking, conduit bending, and containment systems. Surface and concealed installation methods.
Terminations — stripping, terminating, and connecting cables at consumer units, distribution boards, accessories, and equipment.
Testing — continuity of protective conductors, insulation resistance, polarity, earth fault loop impedance, prospective fault current, and RCD operation. Using calibrated instruments correctly.
Inspection — visual inspection of installations, identifying defects, and applying observation codes.
Fault finding — systematic approach to diagnosing and rectifying faults using test instruments and logical reasoning.

Each skill is typically assessed as "competent" or "not yet competent." Your supervisor must observe you performing the skill on a real job (not just in a workshop) and confirm competence by signing and dating the sign-off document. Some skills may need to be demonstrated multiple times before sign-off is given.

In the app

Practise with unlimited mock exams

AI-generated mocks, instant marking, and explanations on every question — targeted at your weakest topics. From £6.99/mo.

06 · Apprentice Guide

Building Your Portfolio: A Practical Approach

The key to a strong OJT portfolio is consistency. Start gathering evidence from day one of your apprenticeship. Take photos every day. Write descriptions at least weekly. Request witness testimonies monthly. Review your coverage against the KSB framework quarterly.

Daily habit — photograph your work at the end of every job or at the end of each day. It takes 30 seconds. If you do not do it now, you will never have that evidence again.
Weekly review — spend 15-20 minutes at the end of each week writing descriptions for your photos, drafting a reflective account of the most interesting job you worked on, and updating your evidence log.
Monthly testimony — ask your supervisor for a witness testimony covering the key work you carried out that month. Provide them with a list of jobs and activities to make it easy for them.
Quarterly gap analysis — map your existing evidence against the KSB framework and identify any gaps. Discuss these gaps with your supervisor and training provider so they can ensure you get the necessary work experience.

In the app

Build your OJT portfolio on your phone

Elec-Mate's apprentice tools let you photograph work, write descriptions, link evidence to KSBs, track your coverage…

07 · Apprentice Guide

Common Mistakes to Avoid

These are the most common mistakes apprentices make with OJT evidence. Avoid them and you will have a portfolio that makes your assessor's job easy and your EPA gateway smooth.

Leaving it all to the end — the single biggest mistake. You cannot reconstruct 3-4 years of evidence in the last few months. Start from day one and build consistently.
Photos without descriptions — a photo of a consumer unit with no explanation of what you did, why, and how is almost worthless as evidence. Every photo needs a written context.
Not mapping to KSBs — evidence that does not link to specific Knowledge, Skills, or Behaviours from the apprenticeship standard is difficult for assessors to use. Always state which KSB each piece of evidence demonstrates.
Only showing installation work — your portfolio should cover the full range of the apprenticeship standard, including inspection and testing, fault finding, health and safety, communication with clients, and working as part of a team. Do not neglect the non-technical KSBs.
Generic witness testimonies — "John is a good apprentice and works hard" is not a useful testimony. It should describe specific work observed and the level of competence demonstrated. Help your supervisor write useful testimonies by telling them what you worked on and which KSBs it covers.

08 · Apprentice Guide

The Employer Role in OJT Evidence

If you employ apprentices, your role in the OJT evidence process is critical. The apprentice cannot build their portfolio without your active support.

Provide varied work experience — ensure your apprentice gets exposure to all areas of the apprenticeship standard: installation, testing, inspection, fault finding, different installation types (domestic, commercial), and different working environments.
Write regular witness testimonies — commit to writing at least one testimony per month. Be specific about what you observed and the level of competence demonstrated.
Sign off skills — when the apprentice demonstrates competence in a skill area, sign it off promptly. Do not wait for end-of-year reviews.
Allow time for evidence recording — give the apprentice 15-20 minutes at the end of each week to update their portfolio. This is not wasted time — it is a requirement of the apprenticeship programme.

Elec-Mate provides tools for both apprentices and employers. Your apprentice builds their portfolio on the app, and you can review their evidence, provide feedback, and sign off skills digitally. For more on employing apprentices, see our Electrical Contractor Guide.

In the app

Support your apprentice with Elec-Mate

Structured training courses, OJT evidence tracking, EPA preparation, and BS 7671 study resources — all included in your subscription.

Test yourselfTry the free Level 2, Level 3 and AM2 mock examsTimed, marked instantly, with an explanation on every question. No sign-up.

Frequently Asked Questions About OJT Evidence

What electricians say

Verified reviews from the UK App Store.

One App for Everything!

Elec-Mate is my go to app for business and electrical work. It's feature rich without feeling cluttered. A true all in one app for quotes, certs, calculations, RAMS, EICRs, and more. I use it every day without fail, and it makes my workflow much smoother since I'm not jumping between apps anymore. The price-to-feature ratio is excellent. Any issues I've had, the developer responds within the hour and usually fixes them the same day. 100% recommend.

Fantastic app for electricians

I've used the app and the web based version for a while now and it's well worth the investment. If you're an apprentice or experienced Spark give it a go, you won't be disappointed.

Absolutely amazing

I've been using Elec-Mate for a while now, and honestly, it's one of the best apps I've ever downloaded. Every aspect of it feels thoughtfully designed, from the clean and intuitive interface to the powerful features that make everything so easy to manage. It's clear that a lot of care and attention went into building this app, and it shows in every detail.

Trusted by electricians across the UK

Real feedback from electricians and apprentices

“Replaced three separate apps with Elec-Mate. Certs, quotes, and scheduling all in one place.”

Daniel Palmer

Sole Trader · DP Electrical

“I've won two contracts this month because I could turn quotes around same-day with the AI cost engineer.”

Nathan Perry

Electrician · NP Electrical Services

“The study centre got me through my AM2. Mock exams and flashcards are brilliant.”

Jake Pizey

3rd Year Apprentice · Apprentice

7-day free trial

Build Your OJT Portfolio with Elec-Mate

Photograph work, write descriptions, link evidence to KSBs, and track your portfolio coverage — all on your phone. Plus structured training courses for Level 2 and Level 3. 7-day free trial.

Start your free trial

From £6.99/mo after the trial — no charge until day 8.

“Replaced three separate apps with Elec-Mate. Certs, quotes, and scheduling all in one place.”
Daniel Palmer, DP Electrical · 5 out of 5

7 days free, then from £6.99/mo
Cancel in one tap — no calls, no hassle
iOS, Android and web
Built to BS 7671:2018+A4:2026

Or download the app

OJT Evidence Guide: Building Your Apprentice Portfolio

Key takeaways

What Is OJT Evidence?

Get the BS 7671 A4:2026 Cheat Sheet — free

Types of OJT Evidence

Photographic Evidence

Witness Testimonies

Work Logs and Reflective Accounts

Skills Sign-Off Records

Certificates and Test Results

Photographic Evidence: How to Do It Properly

Witness Testimonies

Skills Sign-Off

Practise with unlimited mock exams

Building Your Portfolio: A Practical Approach

Build your OJT portfolio on your phone

Common Mistakes to Avoid

The Employer Role in OJT Evidence

Support your apprentice with Elec-Mate

Frequently Asked Questions About OJT Evidence

What is OJT evidence and why do I need it?

How many pieces of OJT evidence do I need?

Can I use photos taken on my phone as OJT evidence?

Who can provide a witness testimony?

What is a reflective account and how do I write one?

How do I organise my OJT portfolio?

What happens if I do not have enough OJT evidence for EPA gateway?

Continue reading

EPA Simulator Guide

Apprentice Portfolio Guide

Apprentice Study Centre

Electrical Apprenticeship Guide

Electrical Contractor Guide

Inspection and Testing Course

What electricians say

One App for Everything!

Fantastic app for electricians

Absolutely amazing

Trusted by electricians across the UK

Build Your OJT Portfolio with Elec-Mate